10 Universal Remote Control (kevät 2020)
10. A Text: Universal Remote Control
HOW DOES A UNIVERSAL REMOTE CONTROL WORK?
You tell the remote which type of device you want to operate using the four keys arched across the top of the remote. These keys, known as mode keys, are labeled STB (Set Top Box), TV, DVD, and AUX. Each mode key is associated with a specific device. As an example, after programming the remote, if you want the remote to operate your TV, you simply press the TV key.
PART 1. INSTRUCTIONS FOR ASSIGNING A DEVICE CODE TO A MODE KEYRefer to the code tables at the end of this guide to locate the information for the device you want to control.
NOTE: If your device is not listed, you may be able to program the remote using the Auto-Search function. Go to What If None of the Codes Work on page 15 for instructions.
- Turn on the device that you want to assign a mode key.
- Press and hold the appropriate mode key (TV, DVD, or AUX) on the remote, and then press and hold the OK key.
- Release both keys and the mode keys blink twice.
- Enter the first 4-digit setup code for the device using the numeric keys (0–9) on the remote. The mode key blinks three times to indicate that the code entry was accepted.
NOTES:- When an invalid code is entered, the selected mode key displays a long flash to indicate that you have not entered the code correctly.
- Should the remote time-out before you complete the code setup, you must start over. This is indicated by one long flash of the red LED.
- Point the remote at the device, and press POWER to test the device.
- Did the device power off?
- If YES, write this code number in the table found on page 38. You may need it again if the device code is accidently erased.
- If NO, repeat this procedure from step C using a different setup code.
- Repeat this procedure for each mode key you want to program.